Effect of sintering additive on crystallographic orientation in AlN prepared by slip casting in a strong magnetic field

The preparation of oriented AlN bulk ceramics with and without additives was achieved by slip casting in a high magnetic field. The a and b axes of the AlN were aligned parallel to the direction of the magnetic field. The degree of crystallographic orientation was controlled by the viscosity of the slurry and the grain growth during sintering attributed to the sintering additives. The mechanical properties of the textured AlN depended on the direction of the crystallographic orientation.     

玻璃纤维/大麻纤维增强聚丙烯混杂复合材料的力学性能和断裂特征(英文)

目前在土木工程,建筑,汽车等领域里使用的复合材料中,玻璃纤维是用量最大的增强材料。由于保护地球环境的呼声日趋高涨,天然纤维被期待着代替源于石油而且再利用困难的玻璃纤维,成为绿色复合材料的必要材料之一。本文通过注射成型工艺制作了玻璃短纤维,大麻短纤维以及混杂型纤维增强复合材料,并在拉伸实验中应用两种不同频率的声发射技术检测了拉伸断裂特性。实验发现,随着大麻纤维的加入和混杂复合材料绿色度的增加,复合材料的拉伸弹性模量随之线性增大,而拉伸强度基本保持不变。当大麻纤维的含量超过20wt%的时候,拉伸强度开始降低。在不同频率的声发射实验中,混杂型复合材料的声发射事件的产生都比单一纤维增强型复合材料要来的晚,也就是说,纤维的混杂有助于推迟微裂纹的产生。     

Effect of Ultrasonication on the Microstructure and Tensile Elongation of Zirconia-Dispersed Alumina Ceramics Prepared by Colloidal Processing

To obtain dense, fine-grained ceramics, fine particles and advanced powder processing, such as colloidal processing, are needed. Al₂O₃ and ZrO₂ particles are dispersed in colloidal suspensions by electrosteric repulsion because of polyelectrolyte absorbed on their surfaces. However, additional redispersion treatment such as ultrasonication is required to obtain dispersed suspensions because fine particles tend to agglomerate. The results demonstrate that ultrasonication is effective in improving particle dispersion in suspensions and producing a homogeneous fine microstructure of sintered materials. Superplastic tensile ductility is improved by ultrasonication in preparing suspensions because of the dense and homogeneous fine microstructure.     

Crystal Growth of Thiol-Stabilized Gold Nanoparticles by Heat-Induced Coalescence

A monolayer of dodecanethiol-stabilized gold nanoparticles changed into two-dimensional and three-dimensional self-organized structures by annealing at 323 K. Subsequent crystal growth of gold nanoparticles occurred. Thiol molecules, although chemisorbed, form relatively unstable bonds with the gold surface; a few thiols desorbed from the surface and oxidized to disulfides at 323 K, because the interaction energy between thiol macromolecules is larger than that between a thiol and a nanoparticle. The gold nanoparticles approached each other and grew into large single or twinned crystals because of the van der Waals attraction and the heat generated by the exothermic formation of disulfides.     

Tetra-Repeat Microsatellite Markers for the Masu Salmon (Oncorhynchus masou masou) and Its Application in Cross-Subspecies Amplification

We developed tetranucleotide-repeat microsatellite markers for the masu salmon (Oncorhynchus masou) complex. 454 pyrosequencing was used to discover repeat motifs, and seven polymorphic microsatellite-primer sets were identified. The number of alleles detected at each locus ranged from four to 24 and the expected heterozygosity varied from 0.57 to 0.92. Cross-subspecies amplification for O. m. masou, O. m. ishikawae and O. m. subsp. was successful. These microsatellites can be utilized in studies of genetic structure, genetic diversity, and intra- and inter-subspecific hybridization, making a contribution to conservation and management of the Oncorhynchus masou complex.     

Oxidative Dehydrogenation of Propane with CO2 Over Cr/H[B]MFI Catalysts

Abstract  

Cr/silicalite-1 and Cr/H[B]MFI catalysts were prepared by the impregnation method, and Cr/H[B]MFI were further treated by steaming. The catalysts were employed for the oxidative dehydrogenation of propane to propylene with CO₂ as the oxidant. Cr/H[B]MFI showed significantly higher catalytic activity than Cr/silicalite-1, and steamed Cr/H[B]MFI was superior in the reaction stability to Cr/H[B]MFI. The nature of the supported chromium species have been characterized by a number of physicochemical techniques, such as Raman, UV–vis and NMR. It is concluded that the steaming led to the auto-reduction of some Cr⁶⁺ to Cr³⁺, and resultant Cr³⁺ species might be located near the boron center in the borosilicate framework to counterbalance the negative charge of the framework. The transformation of Cr⁶⁺ species to Cr³⁺ species, facilitated by the steaming process and the presence of boron in the catalyst, is responsible for the enhanced stability of oxidative dehydrogenation of propane to propylene with carbon dioxide as the oxidant.     

Reduction and Sintering of a Nickel–Dispersed-Alumina Composite and Its Properties

High-density nickel–dispersed-alumina (Al₂O₃/nickel) composites with superior mechanical properties were obtained by the hydrogen reduction and the hot pressing of alumina–nickel oxide (Al₂O₃/NiO) mixed powders. The mixtures were prepared by using NiO or nickel nitrate (Ni(NO₃)₂· n H₂O) as a dispersion source of nickel metal. Microstructural investigations of the composite fabricated using nitrate powder revealed that fine nickel particles, } 100 nm in diameter, dispersed homogeneously at the matrix grain boundaries, forming the intergranular nanocomposite. High strength (.1 GPa) and high-temperature hardness were registered for the composite that contained a small amount of nickel dispersion. The ferromagnetic properties of nickel, such as high coercive force, were observed, because of the fine magnetic dispersions, which indicates a functional value of structural composites.